ITU- Professional High-speed Series
Hochleistungs-Festplattenkopierer mit Datentransferraten von bis zu 30 GB pro Minute.
Systems & Fles Copy Modus unterstützt das Kopieren folgender Dateiformate FAT16/32/exFAT, NTFS, Linux(Ext2/Ext3/Ext4), Mac(HFS, HFS+, HFSX.)
Datenlöschung: Quick Erase, DoD Erase und Secure Erase.
Echtzeit-Monitoring per PC-Link-Software.
Log-Management-Tool zeichnet alle Vorgänge auf und verbessert so das Produktions-Management.
Schnelles kabelloses Verbinden der HDDs dank des modernen Steckplatzsystems.
Die Festplattenkopierer der IT Series sind professionelle SATA HDD-Duplizierer, die speziell für hohen Durchsatz an Kopien entwickelt wurden. U-Reach eignete sich hierfür eine einzigartige Multitasking-Technologie an, mit der gleichzeitg bis zu 15 HDDs mit einer hohen Datentransferrate von bis zu 30 GB/min beschrieben werden können.
Wir garantieren höchstmögliche Produktivität ohne Geschwindigkeitsverlurst selbst bei Erhöhung der Target-Anzahl. Die IT Series SATA HDD-Duplizierer verfügen über vier Kopiermodi: Quick Smart Copy, All Partitions Copy, Percentage Copy und Whole HDD Copy. Jeder Modus erfüllt verschiedene Kopiervorgangsanforderungen. Der Quick Smart Copy Modus kopiert nur den Datenanteil und überspringt leere Sektoren. NTFS, Linux (Ext2/Ext3/Ext4), FAT/FAT32, Mac (HFS, HFSX, HFS+) Formate sind alle im Quick Copy Modus unterstützt.
Zusätzlich sind die IT-Series Festplattenkopierer mit mehrstufigen Löschfunktionen ausgestattet. Quick Erase, Full Erase, DoD 5220 Erase und Secure Erase erfüllen jeweils verschiedene Sicherheitsanforderungen beim Löschen von HDDs und SSDs.
Impeccable High Speed
U-Reach Ultra High-Speed IT Series SATA3.0 HDD/SSD duplicator is capable of copying at 30 GB/m on all targets simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers.
U-Reach Ultra High-Speed SATA3.0 HDD/SSD duplicator offers a diverse of duplication modes. The user may select the appropriate mode based on application demand.
Illustration of Copy Modes
The areas containing data are marked in blue. The areas being copied are marked in red. Duplication time depends on the speed supported by the hard drive's controller chip.
1. Quick Erase: Erase HDD index table, and only takes A FEW SECONDS to complete
2. Full Erase: Erase the complete HDD
3. DoD Erase: Complies with the U.S. Department of Defense's standard of erasing.
4. Secure erase: A National Institute of Standards and Technology (NIST 800-88) accepted technique for properly purging hard drives. This method is supported by almost all modern SATA HDD.
High Compatibility
- Quick copy mode supports Windows (FAT16/32/exFAT), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX) formats.
- Whole media copy mode supports all system and proprietary formats.
- Supports various brands.
- Designed to support 18TB+ capacities.
- Supports MBR and GPT partitioning.
Ultra High-Speed IT Series SATA3.0 HDD/SSD duplicator enable end-users to set the minimum writing speed threshold. This feature was developed to prevent and to eliminate problematic devices that halts the duplication and sanitizing process.
U-Reach duplicators makes straightforward copies, but it is imperative that the copied data are verified through a bit-by-bit process, this will ensure successful copied and reduce customer recalls.
End-users are given options to skip bad sectors from the source device. Access the function to select the numbers of bad sectors to skip, from 0 through unlimited.
U-Reach HDD/SSD duplicators has an unique mechanism to prevent alteration of its Event Log Report. It records the operation results and other information of each devices completely. It is an important asset for production management and analysis.
Die mitgelieferte PC Link-Software ist absolut perfekt zum Überprüfen des Kopiervorgangsfortschrittes Echtzeit. Alle relevanten Informationen zu jedem Port werden auf dem PC-Bildschirm angezeigt. Somit ermöglicht dieses leistungsstarke Tool ein schnelles Identifizieren laggender HDDs und hilft dabei enorm, die Effizienz Ihrer Kopierdurchläufe zu optimieren.
Modell | IT1500U | ||
Targets | 1-15 | ||
Datentransferrate | 30 GB/min. (500MB/sec.) *Eigentliche Transferleistung hängt von den jeweilig benutzten HDDs ab. | ||
Spezifikationen | Unterstützte Formate | All Partitions/Whole HDD/Percentage Copy: alle Formate, bekannt oder unbekannt. | |
Quick Copy: FAT16/32/exFAT, Windows (NTFS), Mac (HFS/HFS+/HFSX) und Linux (Ext2/3/4). | |||
Betriebsart | Standalone (ohne PC) | ||
Unterstutzte Sprachen | Englisch, Japanisch | ||
Anzeige | Hintergrundbeleuchtetes LCD | ||
LEDs | 3 LED-Indikatoren per Port: Yellow (Power), Green (Pass), Red (Fail) | ||
Bedienfeld | 4 Drucktasten (▲, ▼, OK, ESC) | ||
Features | Kopiermodi | Quick Copy, All Partitions Copy, Whole HDD Copy, and Percentage Copy | |
Überspringen fehlerhafter Sektoren | Manuell einstellbarer Bad Sector-Schwellenwert (Bad sector) zum Überspringen beim Kopiervorgang | ||
Vergleichsfunktion | Bit-by-bit hardwarebeschleunigter Datenvergleich | ||
Datenlöschmodi | Quick Erase, Full Erase, DoD Erase und Secure Erase | ||
Spezial-Features | PC Monitoring | Echtzeit-Monitoring der Kopiervrgänge am PC | |
Log Report Management | Echtzeitaufzeichnung aller Vorgänge und Log Reports per PC Link-Software | ||
Event Log Reports werden über den USB-Port ausgegeben und auf USB-Geräten abgespeichert. | |||
Kompatibilität | Unterstützte OS | Windows, Linux and weitere Standalone-Systeme | |
Kompatible Schnittstellen | ohne Adapter | 1.8"/2.5"/3.5” SATA HDDs und SSDs | |
mit Adapter | microSATA, mSATA und M.2 | ||
Advanced Format | Supports MBR, GPT, and Advanced Format. | ||
Hardware-Spezifikation | Stromversorgung | Einstellbare Spannung 115V-240V, 50/60Hz | |
Temperatur | Betrieb: 5°C ~ 45°C (41°F ~ 113°F) Lagerung: -20°C ~ 85°C (-4°F ~ 185°F) | ||
Luftfeuchtigkeit | Betrieb: 20% ~ 80%; Storage Humidity: 5% ~ 95% | ||
Zertifikate | FCC, CE, RoHS |
Sales / Support
U-Reach GmbH
Kettenstrasse 4
69190 Walldorf
Germany
Tel: 0049 6222 938823