ITU- Professional High-speed Series
Speed transfers of up to 30GB per minute.
Systems & files copy mode supports Windows (FAT16/32/exFAT, NTFS),Linux (ext2/ext3/ext4), Mac (HFS, HFS+, HFSX.)
Data Sanitization: quick erase, DoD erase, and secure erase.
Real-Time PC Monitoring.
Log report management records all task details for better production management.
Cable free connection for easier HDD insertion & removal.
IT series is a professional SATA HDD duplicator, specially designed for high-volume duplication. U-Reach adopted a unique multitasking technology, it can simultaneously copy 7 HDD targets with a high transfer speed of 30GB per minute.
We guarantee the highest productivity without speed degradation even as the number of targets increase. The IT series SATA HDD duplicator provides four copy modes: quick smart copy, all partitions copy, percentage copy and whole HDD copy that all meet different duplication task requirements. The quick copy mode copies data and skips blank area. NTFS, Linux (Ext2/Ext3/Ext4), FAT (16/32/exFAT), and Mac (HFS, HFS+, HFSX) formats are all supported with quick copy mode.
In addition, the IT series SATA HDD duplicator is equipped with different levels of secure erase functions, Quick Erase, Full Erase, DoD 5220 Erase government standards and Secure Erase which can fulfill different levels of security for HDD wiping.
Impeccable High Speed
U-Reach Ultra High-Speed IT Series SATA3.0 HDD/SSD duplicator is capable of copying at 30 GB/m on all targets simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers.
U-Reach Ultra High-Speed SATA3.0 HDD/SSD duplicator offers a diverse of duplication modes. The user may select the appropriate mode based on application demand.
Illustration of Copy Modes
The areas containing data are marked in blue. The areas being copied are marked in red. Duplication time depends on the speed supported by the hard drive's controller chip.
1. Quick Erase: Erase HDD index table, and only takes A FEW SECONDS to complete
2. Full Erase: Erase the complete HDD
3. DoD Erase: Complies with the U.S. Department of Defense's standard of erasing.
4. Secure erase: A National Institute of Standards and Technology (NIST 800-88) accepted technique for properly purging hard drives. This method is supported by almost all modern SATA HDD.
High Compatibility
- Quick copy mode supports Windows (FAT16/32/exFAT), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX) formats.
- Whole media copy mode supports all system and proprietary formats.
- Supports various brands.
- Designed to support 18TB+ capacities.
- Supports MBR and GPT partitioning.
Ultra High-Speed IT Series SATA3.0 HDD/SSD duplicator enable end-users to set the minimum writing speed threshold. This feature was developed to prevent and to eliminate problematic devices that halts the duplication and sanitizing process.
U-Reach duplicators makes straightforward copies, but it is imperative that the copied data are verified through a bit-by-bit process, this will ensure successful copied and reduce customer recalls.
End-users are given options to skip bad sectors from the source device. Access the function to select the numbers of bad sectors to skip, from 0 through unlimited.
U-Reach HDD/SSD duplicators has an unique mechanism to prevent alteration of its Event Log Report. It records the operation results and other information of each devices completely. It is an important asset for production management and analysis.
Die mitgelieferte PC Link-Software ist absolut perfekt zum Überprüfen des Kopiervorgangsfortschrittes Echtzeit. Alle relevanten Informationen zu jedem Port werden auf dem PC-Bildschirm angezeigt. Somit ermöglicht dieses leistungsstarke Tool ein schnelles Identifizieren laggender HDDs und hilft dabei enorm, die Effizienz Ihrer Kopierdurchläufe zu optimieren.
Model | IT700U | ||
Targets | 1-7 | ||
Speed | 30GB/min. (500MB/sec.) *Actual performance is dependent on HDD transfer rates. | ||
Specifications |
Supported Formats | Copy Modes: All Partitions/Whole HDD/Percentage copies all types of formats, both known, and unknown. | |
Quick Copy: FAT16/32/exFAT, Windows (NTFS), Mac (HFS/HFS+/HFSX), and Linux (Ext2/3/4). | |||
Operating Type | Stand-alone, non PC-based operation | ||
Language Support | English, Japanese | ||
LCD Display | Backlit Monochrome LCD Display | ||
LEDs | 3 LED Indicators per Port: Yellow (Power), Green (Pass), Red (Fail) | ||
Control Panel | 4 Push Buttons (▲, ▼, OK, ESC) | ||
Features | Copy Modes | Quick Copy, All Partitions Copy, Whole HDD Copy, and Percentage Copy | |
Skip Bad-Sectors | Manually set (Bad sector) threshold range to skip during copy process | ||
Compare Function | Bit-by-bit hardware-accelerated data comparison | ||
Sanitization Modes | Quick Erase, Full Erase, DoD Erase, and Secure Erase | ||
Special Features | PC Monitoring | Real-time status monitoring through PC | |
Log Report Management | Monitor real-time recordings and Log Reports via PC-Link | ||
Event log reports are generated through the USB port and saved to USB devices | |||
Compatibilities | OS Supported | All (Windows, Linux, and other stand-alone systems) | |
Compatible Interfaces | w/o Adapters | 1.8"/2.5"/3.5” SATA HDDs and SSDs | |
w/ Adapters | microSATA, mSATA and M.2 | ||
Advanced Formats | Supports MBR, GPT, and Advanced formats. | ||
Hardware Specifications | Power Supply | Adjustable voltage 115V-240V, 50/60Hz | |
Temperature Range | Operating Temperatures: 5°C ~ 45°C (41°F ~ 113°F) Storage Temperatures: -20°C ~ 85°C (-4°F ~ 185°F) | ||
Humidity Range | Working Humidity: 20% ~ 80%; Storage Humidity: 5% ~ 95% | ||
Certification | FCC, CE, RoHS |
Sales / Support
U-Reach GmbH
Kettenstrasse 4
69190 Walldorf
Germany
Tel: 0049 6222 938823