MTS SAS & SATA Series
Open-platform design accepts all multi-interface HDD/SSD.
Supports both SAS & SATA interface at 18 GB *(Real performance depends on HDD’s speed)/min high transfer speed.
Compliant to both DoD5220.22-M erase , NSA Erase and NIST 8008-88 Secure erase standards.
Supports asynchronies erase.
Log Report Management records all task details for better production management
Cable–free connection for easier HDD insert & remove
MTS series, a professional SATA/SAS HDD duplicator is specially designed for high-volume duplication. U-Reach adopted a unique multi-tasking technology, it can simultaneously copy 7 HDD targets and with high transfer speed up to 18 GB per minute. We guarantee highest productivity without speed degradation even when the number of targets increases. The MTS series SATA/SAS HDD duplicator provides four copy modes: quick copy, all partitions copy, percentage copy and whole HDD copy, that can meet different duplication task requirements. NTFS, Linux (Ext2/Ext3/Ext4), FAT/FAT32/64, Mac (HFS, HFSX, HFS+) are supported formats with quick copy. Quick copy mode copies data and skips blank area; this mode enhances copy speed.
In addition, the MTS series SATA/SAS HDD duplicator is equipped with different levels of secure erase functions, Quick Erase, Full Erase, DoD 5220 Erase government standards and Secure Erase which can fulfill different levels of security for HDD wiping.
U-Reach SAS/SATA HDD/SSD duplicator is capable of copying at 18 GB/m on all devices simultaneously, without any speed degradation as number of targets increase. This duplicator is great for HDD/PC/NB manufacturers.
Whole HDD Copy mode supports all kinds of partition and data formats and copies every sector of the source HDD.
This mode can identify the HDD formats of Windows (FAT16/32/64, NTFS), Linux(ext2/ext3/ext4), Mac(HFS, HFS+, HFSX). It will only copy the data and system contained area, which enhances the copying efficiency very much.
1. Quick Erase: Erase HDD index table, and only takes A FEW SECONDS to complete
2. Full Erase: Erase the complete HDD
3. DoD Erase: Complies with the U.S. Department of Defense's standard of erasing.
4. Secure erase: A National Institute of Standards and Technology (NIST 800-88) accepted technique for properly purging hard drives. This method is supported by almost all modern SATA HDD.
Fast Erase Key enables the end-user to perform erase functions asynchronously.
Supports GPT, MBR table format
Supports Advanced format HDD, Up to 15TB above device
Supported OS: Linux, Unix, Windows, Macintosh, etc. are all supported.
Supports 3.5” HDD/SSD | Supports 2.5” HDD/SSD | |
It is absolutely perfect for MONITORING the work progress during operation. It shows all the information for EVERY PORT, which is a powerful tool for sorting out the lagging writing HDD and keeping the operation in most efficient. All the information you need will be shown on screen of PC.
1.
It’s able to monitor HDD MT Series HDD Duplicator withduplication status from PC while duplicators are connected to it.
2. Shows and records the brand name, model, S/N, duplication time, result of every HDD from all the ports, the info of both source HDD and target HDD are recorded.
3. Slow R/W speed HDD detection: lagging HDD can be easily sorted because user can see the duplication speed of every port via the “Event Log”
4.
To select a period of time in order to export part of the log data. Just one click, the data will be exported into .txt file and saved on PC. The date of export is the file name. (e.g. 20130308.txt)
Records operation time, each port’s process details, including HDD’s model, capacity, S/N, result (pass, fail).
Real-Time recording and viewing Log Report via PC-Link.
Log report .txt file can be generated via USB port and saved to USB device
It can save up to 30,000 piece of log. One instruction onto one PCI-E M.2 is recorded as one piece of log. (e.g. duplication from 1 PCI-E M.2 to 20 targets will be recorded to 20 pieces of log)
When the HDD duplicator stop executing any function, the machine will automatically cut off the power of each port to protect the HDD from damage during removal from the HDD duplicator. The power of each port will only be supplied when the operation is on.
There are two modes of operation, stand-alone and PC-link operation. User can choose either mode to satisfy different need. Stand-alone is excellent in simplifying operation and very user-friendly (operating on four buttons of duplicator would complete all the jobs)
Sales / Support
U-Reach GmbH
Kettenstrasse 4
69190 Walldorf
Germany
Tel: 0049 6222 938823