High-Speed HDD / SSD Duplicator and Eraser 1 to 23 (MT2400H)

Features

 Impeccable efficiency

With up to 18 GB/m transferring bandwidth, the MT Professional Factory HDD Copier is the best solution for Professional HDD/PC/NB Manufacturers. Each SATA interface operates independently. No matter how many targets you would like to duplicate, the speed stays the same and doesn’t decline. 18 GB/m per minute is far beyond any PC-based duplicators.

 Whole HDD Copy

Whole HDD Copy supports all kinds of partition formats.

 Systems & Data Copy

This mode can identify the HDD formats of Windows (FAT16/32/64, NTFS), Linux(ext2/ext3/ext4), Mac(HFS, HFS+, HFSX). It will only copy the data and system contained area, which enhances the copying efficiency very much.

Support 4 types of Erase Mode

1. Quick Erase: Erase HDD index table, and only takes A FEW SECONDS to complete
2. Full Erase: Erase the complete HDD
3. DoD Erase: Complies with the U.S. Department of Defense's standard of erasing.
4. Secure erase: A National Institute of Standards and Technology (NIST 800-88) accepted technique for properly purging hard drives. This method is supported by almost all modern SATA HDD.

 Device Compatibility

Supports GPT, MBR table format
Supports Advanced format HDD, Up to 15TB above device
Supported OS: Linux, Unix, Windows, Macintosh, etc. are all supported.

Open Platform Design

Supports 3.5” HDD/SSD		Supports 2.5” HDD/SSD

MT Series HDD Duplicator with Real-Time PC Monitoring

It is absolutely perfect for MONITORING the work progress during operation. It shows all the information for EVERY PORT, which is a powerful tool for sorting out the lagging writing HDD and keeping the operation in most efficient. All the information you need will be shown on screen of PC

1. It’s able to monitor HDD MT Series HDD Duplicator withduplication status from PC while duplicators are connected to it.

2. Shows and records the brand name, model, S/N, duplication time, result of every HDD from all the ports, the info of both source HDD and target HDD are recorded.

3. Slow R/W speed HDD detection: lagging HDD can be easily sorted because user can see the duplication speed of every port via the “Event Log”

4. To select a period of time in order to export part of the log data. Just one click, the data will be exported into .txt file and saved on PC. The date of export is the file name. (e.g. 20130308.txt)

MT Series HDD Duplicator with Log Report Management

Records operation time, each port’s process details, including HDD’s model, capacity, S/N, result (pass, fail).
Real-Time recording and viewing Log Report via PC-Link.

Log report .txt file can be generated via USB port and saved to USB device

It can save up to 30,000 piece of log. One instruction onto one HDD is recorded as one piece of log. (e.g. duplication from 1 HDD to 21 targets will be recorded to 21 pieces of log)

Auto power control system

When the duplicator stops executing any function, the HDD Copier will automatically cut off the power of each port to protect the HDD from damage during removal from the duplicator. The power of each port will only be supplied when the operation is running.

Standalone operation

There are two modes of operation available for selection, standalone and PC-link operation, each meeting different demands. Standalone is excellent in simplifying operation and very user-friendly (all duplication jobs can be completed via input through 4 buttons).

Specification

Model MT2400H Targets 1:23 Maximum Speed Supported 18 GB/min Copy Format Supported All Partitions/ Whole HDD Copy: All Formats Quick Copy: FAT16/32, exFAT, NTFS, Linux(ext2/ext3/ext4), HFS/HFS+/HFSX Operating Type Stand-alone Real-time PC monitoring Language Support English, Japanese Display Monochrome LCD Display Status LED LED(Red/Green/Yellow) on each slot Control Button 4 push buttons(▲, ▼, OK, ESC) Copy Function Quick Copy All Partitions Copy Whole HDD Copy Percentage Copy Bad sector counting Yes Support Bad-Sector Tolerance Yes Compare Function Yes Erase Function Quick Erase, Full Erase, DoD Erase, Secure Erase Real-Time PC Monitoring Yes Log Report Management Real-Time recording and viewing via PC-Link Log report .txt file can be generated via USB port and saved to USB device Operation system supported All (Windows, Linux, RAID, Other stand-alone systems) HDD/SSD Compatible 1.8"/2.5"/3.5” SATA HDD and SSD HDD/SSD Compatible (via adapter) 2.5", 3.5” IDE HDD, mSATA SSD, micro SATA, eSATA, iVDR Support MBR, GPT Yes Support Advanced Format HDD(15TB Above) Yes Swappable Cable Yes Support Automatic power control Yes Power Supply Adjustable Voltage 100V-240V, 50/60Hz. Working Temperature 5°C ~ 45°C Storage Temperature -20°C ~ 85°C Working Humidity 20% ~ 80% Storage Humidity 5% ~ 95% Regulations FCC, CE, RoHS

* The actual specification may subject to change without notice.

Comparison Chart

Video